Welding & Gas Cutting Equipment

Welding Electrode Holder
Std : CE, EN 60974-11
Model : EHL50 & EHL60
American L Series
GE Polyamide Handle

Welding Electrodes
E6013, E7018

Welding Earth Clamp
Std: CE, EN 60974-13, BS638.5
CrocoSeries
Model : ECCR40 & ECCR60
With Braided Copper Shunt
Steel Jaw , Steel Stud, Bolt

Welding Earth Clamp Brass Jaw
Std: CE, EN 60974-13, BS638.5
Brass Jaw & Fiberglass Handle
Model : ECSTD60B

Welding Cable Connector Male & Female
Std: CE, EN 60974-12
Brass Jaw & Fiberglass Handle
Model : CCD

C-Clamp
Heavy Duty
CE, EN
For Welding Job

Flint Lighter

Hose Brass Nut & Nipple
For Oxygen & Acetylene

Cutting Tip Cleaner
Cleaner Set 10cm
Cleaner Size 7-26mm
Drill Size : 75-49
Model : MITC1012

Hand Wire Brush
4 Row
Available : MS, SS & Brass

Acetylene Cutting Tips
Series : 1-101
One-piece type
For 1600, VH-212, VH-2460 & 398-2
cutting machine cutting torch & cuttingattachments

Heating Nozzle
Acetylene
Multi flame Nozzle for preheating and straightening

Heating Torch

Cutting attachment outfits
Smooth Cutting oxygen Value
For precise ease-on control
SS tubes for added torch strength
and heat resistance.
SS Lever for extra durability & Operator safety.
Model : V2460`

Cutting attachment handle
Model : 315FC
Heavy Duty
Work with all fuel gas

Flash Back Arrestor Acetylene & Oxygen
Regulator & Torch
FA10 & FA30
Designed to prevent reverse gas flow and flashbacks, protecting welding hoses, regulators and cylinders
10” maximum cutting capacity
Color coded connector Oxygen ( green ) Fuel gas ( Red)

Hand Cutting Torches
Model : 900FC, Victor
Built in flash Back arrestor & Check valves
For use with any fuel gas, 5PSIG and above.
Uses Series 1 cutting tips
Hose connection are 9/16”-18” unless noted
Cutting capacity ½” ( 3.25mm) to 5” (127mm)

Oxygen & Acetylene Regulator
Heavy Duty
Best weld & victor
Gas apparatus and flow
Control equipment

Twin Line Welding Hose
Construction Tube:Polychloroprene Synthetic Rubber
Cover:Chemivic Synthetic Rubber
Reinforcement:Spiral Synthetic Yarn
Coupling:Contact fitting manufacturer for proper fitting recommendation and coupling procedure.
Non Stock / Sizes:For special production run minimum requirements, see Appendix D.
Temperature Range:-40°F to 120°F (-40°C to 49°C)

Journeyman Select
This heavy duty outfit cuts up to ¾”(19.1mm) or 8”(203.2mm)
With optional tips. It welds up to ½” (12.7mm) or 3” (76.2mm)
With optional nozzle
ESS4 series regulator
H 315FC Torch handle with built in flash back arrestor & check Valves.
CA 2460 Cutting attachment
W Welding Nozzle Sizes : 1,3,5
MFA Heating Nozzle Size : 8
1-101-1 Cutting tip,Tgrade hose 20’ x ¼”
Sticker and tip cleaner Soft sided shade 5 goggles

Manual Gouging Torches K4000
Heavy Duty
5/32” (4mm) to ½” (13mm)
Amps : 1000

Manual Gouging Torches K3000
Medium Duty
1/8” (3mm) to 3/8” (10mm)
Amps : 600

Carbon Arc Gouging Electrodes
Designed Specifically for the air carbon arc metal removal process
Superior metal removal rate
Clean cuts
Cooler operations
Uniforms Diameter
Excellent arc stability

Welding Chipping Hammer
Cone and Chisel
This model features flex-O steel coil hand grips welded to tough steel handle shafts,. Head are pinned for safety and reliability

Cylinder Trolley
Type : Double cylinder
Size : 14” Wheels
Load Capacity : 200 Kg

Chain Type Pipe Cutting Machine
Pipe Capacity ( 4” to 24”-26”)
Included chain has 80 links. Additional chain links can be purchased for larger pipe sizes
Koike cutting torch and three tips included
Control valves for fuel gas, pre heat and cutting oxygen included
Torch holder racks in, out up and down
Torch holder can be positioned at any angle
A handy clutch allows quick rotation of the machine around the pipe to verify position and square up the chain

Welding Cable
Features:Annealed Bare Copper High FexibleConductors
Single Jacket Of EPDM,Neoprene,other
Materials Available on Special RequestDouble Insulation Available on Special
RequestRohs,Pahs,ReachAvailable Upon Request
Specification
High Strength tear-resistant JacketExcellent Resistance to Abrasion and ImpactSuperior Flexibility,Evenat Cold temperature To-50℃Flame ResistantSpecial Stranded Conductor for Added Flexibility and Easy Handling

VC-200 Cutting Machine
The versatile VCM 200/201 kits have a tractor machine that can be used on its own track for straight line cutting and a variety of welding operations. Off track and with a radius rod assembly, the VCM 200 can also be used for circle cutting
Features
Large thumb screws for hand tight adjustments
Dual drive controls and direct speed readout
Cone disc drive
Constant speed AC induction motor located on the side opposite the torch for cooler, more efficient operation
Counter-balanced design allows torch racking distance up to 457.2 mm (18") from the machine
Speed constant over wide range of temperatures
Torch holder designed for 35.1 mm (1.38") barrel diameter torches
Flat mounting deck
HT (high temperature) packages have the addition of a heat shield
HS (high speed) packages have a speed range of 12.7-304.8 cm/min (5-120"/min)

H-501 PORTABLE WELDING CUTTING KIT
Features
*Capable of welding from 0.5mm up to 6mm, cutting from 3-100mm with appropriate cutting tips
*Complete accessory package, hose, spark lighter, goggles plus tip cleaner*External torch mounted reverse flow check valves.
*Forged and extruded brass for durability
*Brass & Stainless steel construction
*Torch handle w/two stainless steel needle valve for fast, accurate flame adjustment assembled with two tubes inside
*O-ring seals

Welding Mask ( Welding Helmet )
Features
Material: PP shell and welding gilters.
Head hoop: with new pp. easy be assembled.
Mask shell: with impact-resistant shell wear well, protect face and head from hurt by spark.
Glass Size: 108*50*3 mm.
Specification
High quality pp material, flexible and durable.Handy ratchet adjustment knob for the head hoop.
Different sizes for welding filters available.
Perfectly protect your eyes against UV and IR rays.
Applied for gas welding, brazing and torch cutting work

Face Shield Glass
Features
Material: PP shell and welding gilters.
Head hoop: with new pp. easy be assembled.
Mask shell: with impact-resistant shell wear well, protect face and head from hurt by spark
Specification
Functional and durable facial protection for welding, gas cutting by spark etc.
Handy ratchet adjustment knob for the head hoop.
Different sizes for welding filters available.
Perfectly protect your eyes against UV and IR rays.
Applied for gas welding, brazing and torch cutting work.
The original design of Anti -interference switch avoids not seeing welding object clearly due to complex surroundings nearby.

Face Shield Bracket
Specification
Functional and durable facial protection for welding, gas cutting by spark etc.
Handy ratchet adjustment knob for the head hoop.
Different sizes for welding filters available.
Perfectly protect your eyes against UV and IR rays.Applied for gas welding, brazing and torch cutting work.
The original design of Anti -interference switch avoids not seeing welding object clearly due to complex surroundings nearby.

Welding Helmet for Safety Cap
Model : 6PA3
ANSI,
Lift front lens holder with semi-aluminum bracket

Portable Welding Oven ( Dry rod )
10 lb (5 kg) storage capacity for 14 in or 18 in electrodes
Rod elevator for quick removal of electrodes
10 ft cord locks into the oven base to create a fixed connection
Body and lid insulation minimizes heat loss and energy usage
Indicator light
Safety Yellow color increases field visibility
Spring latch tightly secures insulated lid for transport
NEW 120/240V

DryRod® Type 300 sets the industry standard for bench rod ovens
400 lb capacity of 18 in (450 mm) electrodes
Thermostatic control
Circular oven chamber promotes airflow and consistent heating
Shelving gives ability to fit a 50 lb can
Available with optional thermometer for immediate temperature indication
120/240V -PN 1200200, PN 1200201 (with thermometer) Model 16C
240/480V -PN 1200100, PN 1200101 (with thermometer) Model 15D
Stacking option also available (please refer to downloadable manual for ST PNs)

PVC Tarpaulin Type 2219 Fire Retardant
Size: 20Ft x 20Ft
Technical Specifications:
PVC Coated Fabric
Thickness: 0.35mm
Finished Coated Weight: 420grm/m2
U.V Treated | Weather Resistant | 100% waterproof | Fire Retardant
Material will be resistant to seawater, sunlight & other sun damaging

Welding Fire Blankets ( Fiber Glass Cloth )
A welding blanket is a piece of safety equipment designed to protect equipment and the welder while welding.
A welding blanket typically consists of a layer of flexible protective material containing unexpanded vermiculite and inorganic heat resistant fibrous material
Sizes available : 1.8 x 1.8 mtr, 0.8mm x 30 mtr, 1mm x 50 mtr

Pipe Stand V Head
V-head with welded rib support for extra strength
T handle for extra safety in securing head

Metal Cutting & Grinding Disc
Sizes : 4”, 4 ½”, 5”, 7”, 9” 12”, 14” & 16”

Wheel Wire Brush
Fast Cleaning action
Welding cleaning
Surface preparation

Cup Wire Brush
Heavy Duty Cleaning of Large metal surfaces
Cleaning prior to welding
Weld scale and corrosion removal
Rust and paint removal
Roughening
Deburring

Spindle Mounted Flap Wheel
For hand held machines working on profiled pieces, inner surfaces and hardly reachable areas universal product for steel and SS material

Flap Disc
Stock Removal
Blending Welds
Edge Chamfering
Deburring
Rust removal
Cleaning and finishing
Highly resistant backing crease & tear resistant, lasing longer
Renewal of flaps extends sanding life